Ecomix 5 in 1 100lt Clack WS1CI Iron and Manganese Reduction Water System

Modern integrated water treatment system with 100 liter Ecomix 5 in 1 resin to reduce Iron, Manganese, Hardness, Organic color and Ammonia.
The system is controlled by an American automatic volumetric head CLACK WS1CI

In more detail, the system consists of:

• Clack WS1CI (USA) automatic volumetric head with built-in hardness adjustment valve
• 1 Pressure vessel 16" X 65" ( diameter 41cm, height 167cm) Approximate dimensions
• Brine tank 145lt ( width 50cm, depth 50cm and height 90cm) Approximate dimensions
   

Technical Characteristics of Ecomix®A Resin 5 in 1

Ecomix® A is a multiparametric – multifunctional resin that solves 5 water problems in just 1 system. It works like a classic softener and is ideal for many parts of Greece where there are problems such as the existence of hard water, iron, manganese etc.
Enjoy soft and clean water thanks to the resin of Ecomix® A.

• Maximum operating temperature: 40 °C
• Service flow rate: 20-25 m/h
• Backwash flow rate: 10-15 m/h
• Operating flow Brine (slow rinse) flow rate: 3.5 m/h
• Required free column space: 40% or more
• Salt consumption: 100 grams per liter of resin
• Water consumption per regeneration: up to 10 liters per liter of resin
• Ion-exchange capacity: 35 g CaCO3/L
• Removes: Hardness, Iron, Manganese, Organic TOC and Ammonia
• Improves taste and smell and metallic sensation
• Resin life up to 10 years

Water parameters to be treated

• Hardness - 15 mEq/L
• Iron - 15 mg/L
• Manganese - 3 mg/L
• Chemical Oxygen Demand - 20 mg O₂/L
• Ammonium - 4 mg/L
• pH - 5-9
• Maximum TDS - 4000 mg/L

Electronic Volumetric Head CLACK WS1CI (USA)

The American company CLACK is ranked No. 1 worldwide in the manufacture of valve heads and resins.

CLACK's WS1CI volumetric electronic head (valve) features a pulsating flow meter (turbine type) and when the user defined liters (cubic degree base) are consumed, the resin regeneration process begins. In addition to the volumetric function, the time function can also be activated, thus giving more advantages.
The regeneration process takes place in up to 9 cycles, all of which are configurable. 5 are enabled in the main menu:

1. Backwash : Resin preparation. The resin is rinsed in the maximum flow of water to prepare it for the next step. We usually set it from 3 to 8 minutes depending on the installation.
2. Brine & Slow Rinse : In this stage the head draws the salt water (sodium chloride) from the brine tank and irrigates the resin with it. It is the longest stage and lasts at least 60 minutes.
3. Backwash : Resin wash. The resin is rinsed in the maximum flow of water to prepare it for the next step. We usually set it to 1 minute depending on the installation.
4. Fast Rinse : The resin is rinsed at maximum flow to remove salt residue and return to its original state ready to deliver softened water again. This process takes from 5 to 10 minutes depending on the installation.
5. Brine Refill: The head refills the brine tank with water. This process takes from 3 to 10 minutes depending on the installation.

Clack's valve has a built-in Mixing Valve hardness adjustment system. This is a screw - regulator which is located at the output of the softener and allows us to set the desired hardness in applications with a hardness above 0 (eg in homes).

Technical Characteristics

Conditions for Correct Operation of the System

• If the mains pressure is above 6 bar, a pressure reducer is recommended.
• Installation of a sediment filter before the softener inlet to protect the head.
• Use salt only in tablets.

Important

1. For the right choice of softener and for any other information, please contact us, we will be happy to serve you.
2. The softeners before they are shipped can be adjusted by us according to your needs.
3. When starting the softener for the first time, our technicians can guide you with the necessary information.