Twin Water Softener Classic 2 x 50lt CLACK WS1CI TWIN Volumetric 6.2m³/h

Complete twin water softener system for uninterrupted operation consisting of:

• Clack WS1CI Twin Auto Volumetric Head
• 2x50lt Pressure vessel ( diameter 30.5 cm, height 122 cm each column) Approximate dimensions
• Brine Tank 100lt ( diameter 46 cm and height 88 cm) Approximate dimensions

Twin Electronic Volumetric Head CLACK WS1CI TWIN 

The American company CLACK is ranked No. 1 worldwide in the manufacture of valve heads. This is the best valve head in the world

CLACK's WS1CI Twin volumetric electronic head (valve) features a pulsating flow meter (turbine type) and when the user defined liters (cubic degree base) are consumed, the first column resin regeneration process begins. At the same time, the valve turns on the second column and in this way ensures uninterrupted operation of softened water.
The regeneration process takes place in up to 9 cycles, all of which are configurable:

1. Backwash : Resin preparation. The resin is rinsed in the maximum flow of water to prepare it for the next step. We usually set it from 3 to 8 minutes depending on the installation.
2. Brine & Slow Rinse : In this stage the head draws the salt water (sodium chloride) from the brine tank and irrigates the resin with it. It is the longest stage and lasts at least 60 minutes.
3. Backwash : Resin wash. The resin is rinsed in the maximum flow of water to prepare it for the next step. We usually set it to 1 minute depending on the installation.
4. Fast Rinse : The resin is rinsed at maximum flow to remove salt residue and return to its original state ready to deliver softened water again. This process takes from 5 to 10 minutes depending on the installation.
5. Brine Refill: The head refills the brine tank with water. This process takes from 3 to 10 minutes depending on the installation.

Dupont DOW DOWEX HCR-S/S Softening Resin

Dupont Dow Chemicals is the world's largest resin manufacturer. Based in USA, it counts over 600 resins specialized for hundreds of applications.
The resin we use DOWEX HCR-S/S is a strong cationic suitable for potable water softening applications. It is WQA certified to NSF/ANSI-61 and complies with the US FDA Regulation 21 CFR 173.25. The resin absorbs the Calcium Ca2+ and Magnesium Mg2+ ions, elements which make up the hardness of the water, the so-called salts. The resin is charged with Na+ ions and has a total capacity of 1.9 eq/L. Each time it becomes saturated it will need regeneration with >99.5% purity sodium chloride (salt).

Technical Characteristics 
 

Conditions for Correct Operation of the Softener

• If the mains pressure is above 6 bar, a pressure reducer is recommended.
• Installation of a sediment filter before the softener inlet to protect the head.
• It is recommended to use salt in tablets due to its high purity.

Important

1. For the right choice of softener and for any other information, please contact us, we will be happy to serve you.
2. The softeners before they are shipped can be adjusted by us according to your needs.
3. When starting the softener for the first time, our technicians can guide you with the necessary information.