Hanna HI7061L Cleaning Solution (500ml)

HANNA HI7061L Cleaning General purpose cleaning buffer in a 500ml package

The most common cause of pH measurement inaccuracies is a dirty or improperly cleaned electrode.
This is very important to note because during calibration, the instrument assumes that the electrode is clean and that the standard curve generated during the calibration process will remain a valid reference until the next calibration.
pH meters on the market today will allow an offset voltage of about ±60 mV. Deviation from 0 mV is not unusual, but ideally should not be more than ±30 mV. The calibration process compensates for the shift voltage change. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode, then inaccurate readings will result.

Cleaning is a quick and efficient routine that should be performed on a regular basis as a precaution against using a dirty electrode and to ensure proper calibration.
Simply immersing the electrode in HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.

• Airtight bottle with safety cap
• It ensures the quality and freshness of the solution
• Each bottle has the batch number and expiry date

Hanna offers a comprehensive line of cleaning solutions designed for specific applications.

Specifications