1/2" Water Leak Sensor Solenoid Valve

Electronic water leak sensor with 1/2" brass solenoid supply valve for undercounter filtration systems.

• It has a 1/2" brass threaded inlet/outlet and runs on a 9V battery.
• Ideal accessory to prevent leaks in under-counter water treatment systems as well as in dishwashers, clothes washers and even coffee machines in commercial areas.
• It is placed at the entrance of the filtration system or the respective device.
• The machine is divided into two parts. The first part is the solenoid valve and the second part is the sensor. The sensor is powered by a 9V battery (included in the package). On the back of the sensor there are 2 metal rods (electrodes) with protrusions, which should be resting on the floor at the place of its installation. When the metal rods get wet, they give a command and the water supply to the system stops automatically.
• It provides an audible alarm indicator and a blue light indicator in case of leak detection.
• Finally, in the event of a low battery level, it provides an audible alarm and a red alarm light, with immediate blocking of the water flow.
• It is equipped with a 1.5m long cable.

Technical Characteristics

• Operating Voltage: 9V DC
• Operating Current: Typical 1.0 mA, Maximum 15.0 mA.
• Cable Length: 1.5 M from the solenoid valve to the sensor
• Connection cross-section: 1/2" male x 1/2" male thread (brass connections)
• Leak Detection Sensor: Metal electrodes
• Operating Temperature: -20 ~ 80℃
• Maximum Operating Pressure: 8 Bar
• Water shut-off mechanism: Solenoid valve