Description
The American company Pentair leads the way again by manufacturing a reverse osmosis system with its subsidiary company General Electric, the Pentair PRF-RO GE MERLIN. It is the only reverse osmosis system that can produce osmotic water without a pressure pump, therefore without electricity and other moving parts. It does not require a water storage tank and at the same time is very easy to install and maintain.
Merlin Uses 2 TLC-350 High Flux membranes of special high recovery technology with low water rejection and high salt rejection.
With a minimum operating pressure of 2.8bar and 750ppm TDS it is capable of producing 1 liter per minute and can reach up to 2,600 liters per day depending on the operating pressure.
Advantages
- Made in Usa
- Direct flow system without the need to store water
- It does not require a water storage tank
- It does not require electricity
- It works with a low pressure of 2.8 bar 93% average descaling at 5.5 bar
- Water production up to 2,600 liters per day
- Up to 75% less waste water compared to common systems
- Easy filter replacement without tools
- High quality heavy duty containers
- Possibility of horizontal or vertical placement
- Fibredyne technology active carbon prefilter for up to 38,000 liters
- 2 TLC-350 high flux membrane
Lots of Apps
-
Steamers
-
Humidifiers
-
Coffee makers
-
Ice makers
-
Aquariums
-
Photography processing Misters
-
Water coolers
-
Ho.Re.Ca solutions
-
Hotels-Restaurants-Coffee-Pubs
-
Business offices and many other applications.
The System Consists of:
- 1 Fibredyne technology active carbon filter
- 2 TLC-350 reverse osmosis membranes
- 1 in-line line filter
- Faucet
- Fittings (color-coded tubing, John Guest fasteners, flange lubricants, etc.)
- Wrench which is part of the bracket
- Instructions for use
Filter Replacement Frequency:
1st Stage
Fibredyne technology active carbon filter to remove chlorine, VOCs, solid particles, etc. Change every 12 months or 38,000 litres
2nd Stage
2 Pentair TLC-350 High Flux membranes with a total output of 700GPD (2,600 liters per day). Change from 2 to 3 years
3rd Stage
Post Filter line active carbon filter. Replace every 12 months.
Operating Conditions
Operating pressures from 2.76 bar (40 psi) to 5.52 bar (80 psi)
Operating temperature from 4.44°C (40°F) to 37.78°C (100°F)
Total Solids TDS up to 2,000 mg/L
Hardness up to 171 mg/L – (10 grains)
Chlorine up to 1.0 mg/L
Iron up to 0.1 mg/L
Manganese up to 0.05 mg/L
Dimensions
Reviews
There are no reviews yet.