Description
Complete twin water softener system for continuous operation consisting of:
- Clack WS1CI Twin Auto Volumetric Head
- 2 pieces of 25lt resin per Vessel (diameter 23cm, height 90cm each vessel)
- Brine tank 70lt (diameter 40cm and height 70cm)
Twin Electronic Volumetric Head CLACK WS1CI TWIN
The American company CLACK is ranked No. 1 worldwide in the manufacture of valve heads. This is the best valve head in the world CLACK’s WS1CI
Twin volumetric electronic head (valve) features a pulsed (turbine type) flowmeter and when the user defined liters (cubic degree base) are consumed, the first column resin regeneration process begins. At the same time, the valve turns on the second vessel and in this way ensures ensures continuous operation consisting of softened water.
The regeneration process takes place until 9 cycles, all of which are configurable:
1.Backwash: Resin preparation. The resin is rinsed in the maximum flow of water to prepare it for the next step. We usually set it from 3 to 8 minutes depending on the installation.
2.Brine & Slow Rinse: In this stage the head draws the salt water (sodium chloride) from the brine tank and irrigates the resin with it. It is the longest stage and lasts at least 60 minutes.
3.Backwash: Resin preparation. The resin is rinsed in the maximum flow of water to prepare it for the next step. We usually set it from 1 to 2 minutes depending on the installation.
4.Fast Rinse: The resin is rinsed at maximum flow to remove salt residue and return to its original state ready to deliver softened water again. This process takes from 5 to 10 minutes depending on the installation.
5.Brine Refill: The head refills the brine tank with water. This process takes from 3 to 10 minutes depending on the installation.
Softening Resin Dupont DOW DOWEX HCR-S/S
Dupont Dow Chemicals is the world’s largest resin manufacturer. Based in USA, it counts over 600 resins specialized for hundreds of applications. The resin we use DOWEX HCR-S/S is a strong cationic suitable for potable water softening applications. It has WQA certification according to NSF/ANSI-61 and is compliant with the American regulation FDA Regulation 21 CFR 173.25.
Specifications
Head Type | CLACK WS1CI Twin ογκομετρική |
Maximum Flow Rate | 6,2m³/h |
Operating Pressure | min 2 Bar – max 8 Bar |
Regeneration Type | Down Flow |
Connections inlet / outlet | 1″ male thread |
Drain Hose | faucet Φ16 |
Electrical Connection | 220V/12V – 50Hz |
Brine Tank | Made of polypropylene (PP) with 70lt capacity |
Pressure Vessel | 10″ x 35″ With DOW DUPONT DOWEX HCR-S/S Strong Cationic Food-grade Resin |
Amount of Resin per Vessel | 25lt |
Total Amount of Resin | 50lt |
Capacity Cubic degrees per column | 140 (m3 x °F) |
Temperature Range | min 5°C – max 50°C |
Power supply | 230 VAC / 50 Hz |
Conditions for Correct Operation of the Softener
- If the mains pressure is above 6 bar, a pressure reducer is recommended.
- Installation of a sediment filter (melt 20μm) before the softener inlet to protect the head.
- It is recommended to use salt in tablets.
Reviews
There are no reviews yet.